7.4 Component shelf life
Component storage specifications are given in Chapter 8.
Where components are pooled or undergo procedures that influence the shelf life, the maximum shelf life of the component must not exceed the expiry date of the oldest constituent component or the expiry date of the new component produced by the procedure, whichever is the shorter.
For all other components the date of collection will be assigned Day 0 of the shelf life. Day 1 of storage will commence at one minute past midnight on the day of collection.
7.5 Labelling
Component labelling
Barcoded labels and on-demand printing must be used whenever possible.
The design, content and use of labels for blood components should conform to specifications set out in Chapters 25 and 27.
Procedures should be established to ensure labels are satisfactory for their intended use.
Pre-printed labels to be attached to blood donations, documentation and components should be stored under secure conditions.
Donation/donor identification
The use of a unique bar coded/eye-readable donation number links the donation to its donor. Donation numbers must be attached to all integral packs, sample tubes and corresponding documents at the time of donation.
When component production requires the use of subsidiary packs which are not an integral part of the pack assembly, e.g. filtration, pooling, freezing, a secure system must
be in place to ensure that the correct eye-readable and barcoded donation number is placed on each additional pack used.
When components are pooled there should be a system that ensures that the pool carries a unique barcoded and eye-readable identification number(s). This barcode must be able to be read by component manufacturers and blood banks.
When a component is divided a secure system must be in place to ensure that all sub-batches can be traced.